Glans Cover & Urethral Insert Holder Soft Silicone
NOTICE: There is no difference between the entry
hole in the small versus the large covers, only the length and size of the liquid reservoir.
User the Drop-Down
box below to indicate what size you want. Now here is an interesting product that could be very useful with a variety of purposes. We found these enclosed
silicone glans covers and have been looking for something similar for a long time. Not only can you use them to cover
the penis head for the sensations it may produce, but it also can be used to solve the problem most folks find annoying, keeping
a urethral insert in place while in use.
The picture above shows a small cover on a 7" Dildo.
Punch a small hole in the top and you have a great urethral
insert holder that will stay put and control the depth.
Another nice feature these covers have, is that they have a small reservoir in the tip that
holds fluids. Look closely at the picture below and you will see how it is built. This device may also come in handy if you have any medical
challenges and are subject to a small amount of dribble. Folks who have had prostate problems or the prostate removed
may find these handy to wear when being out and about. If your bladder happens to leak a bit, these glans covers will
catch and hold a little fluid and could avoid a potential embarrassing situation. Reusable, just clean with a good antiabotic soap. Do
not use anything but water based lube on these if you happen to want to place lube inside or around the glans opening.
The opening where
the penis head fits, is nice and snug, stretchy and without the hole punched into it, will actually pull a small amount of
vacuum, which makes it stay put on the head. The actual measurements are shown below. Length of the small cover is 2" x 1.5" in diameter
Length
of the large cover is 2.25" and 1-5/8" in diameter The entrance
hole is 3/4" on both the larger and small covers. Soft and very stretchy too!!  Color: Clear
Item #GlansCover
|
