1/8" Brass T-Connector

Back

Out of Stock - T-Connector 1/8" Brass

A clever way to connect a loop to another section of tubing or you can even add a small piece of our 8x4mm conductive tube and make a Banana connector out of it.  If you use two or more of these T-fittings you can even "chain" sections of conductive tubing together into a "spline" electrode. Made from Brass and are completely hollow, which may come in handy for that special DIY project you are wanting to build.

Note: These fit very tight into our 6x2mm tubing (shown below), but seem to work a little better with our 6x4mm tubing. If using these for 6x4mm tubing forming a small diameter loop the rubber may crimp. A smaller loop works better with our 6x2mm tube even though it takes more effort to shove over the barbs.

Here are just a couple of uses for the T-Connector.

                  webassets/OneEighthBrassT-Connector1.jpg

webassets/OneEighthBrassT-Connector1.jpg

webassets/OneEighthComboTandConnector1.jpg

You might want to take a look at the In-Line 1/8" Connectors for your DIY project as well.

Item #BrassTConnect

Regular price $5.00

Concerned with placing your order online? Call or Fax in your order. Simply call 618-343-4344. If you wish to fax your order to us, please send all pertinent details including your credit card information and a copy of your order. Thank you.