If you enjoy using conductive cloth blue bands, you may like this combination of head/partial shaft electrode and conductive ring to place around the balls, or even somewhere on the shaft.

In the past, most web sites only offered the cloth rings, but we found one that covers the entire head and a portion of the shaft.  Add to that, an extra cloth electrode that you can place it where you wish.

These conductive cloth electrodes are pretty stretchy as well and will accommodate most penis and ball sack sizes.

Connecting these electrodes will require a snap connector.  A 2.5mm audio jace with female snaps is included with the package.  However, if you do not have a power box that has a 2.5mm audio jack for leads, you can do a couple of things.  You can get a couple of TENS or Banana socketed cables with a female snap or you can, if you have TENS pins at the end of your leads, just get a TENS to female Snap adapter.  Either way will work OK.  We will tell you that although the small male snaps on the cloth electrodes are a little smaller than a typical snap, they should work OK, but may appear to be a little loose. These adapters can be found in our wire and adapter section of this web site.

Sizes before stretching for each of these single-pole cloth electrodes are shown below.