Sound Clamping Monopole Glans Electrode

 

  

   

***Sound Not Included. Shown for display purposes only.***

Not for the faint-hearted, but oh so much fun. This monopole electrode addresses one of the biggest problems when using e-stim sounds for urethral play. How do you keep it in place?

No one wants an electro sound to fall out or go deeper than you had planned so here is a solution. Suggested by a very good friend of mine, this holder allows you to secure your sound in place and the best bit is that it is also an electrode itself so that opens up all sorts of possibilities in how you play.

Some stimmers have already nicknamed it the "Yellow Submarine" LOL.

   

The main parts of this electrode are made from ABS (think Lego plastic), it's hard-wearing, non-porous and doesn't need painting or any other finish. To produce these electrodes I have had to invest in new equipment and the post-print processing time to get the smooth non-porous finish takes me a long time and this is reflected in the price. If you prefer the best, then this is the version for you. They will be available in very limited quantities so grab one while you can.

   

The lower ring has a length of high quality 6mm CR running through it and this CR is in direct contact with the 4mm CR holding the cap in place. This turns the whole thing into a cage-style monopole electrode with lots of surface area (always a good idea to prevent hot spots).

   

The 4mm CR is easy to adjust and it allows accurate positioning of the cap over your urethra. Once tightened it is secured by two 4mm cord locks (not shown) to lock it in place.

The design of the lower ring allows you to use an elastic band if you want to apply more pressure and this can help keep things snug if you are a grower and shrinker as you stim.

The sound is held securely in place using a nylon bolt that runs through a brass heat-set insert in the cap. I opted for nylon bolts to ensure the sound is never scratched or damaged when you lock it in place.

It will be dispatched with the conductive rubber tubing already fitted.

This electrode takes 2mm TENS style plugs.

It has an inside diameter of 38mm/1.5". and now the 32mm/1.25"

It is compatible with sounds up to 8mm/0.35" in diameter.

Handling Note

This electrode is designed so that you can use an elastic band around the two lower arms to ensure a snug fit. It is designed to be able to flex inwards only though.

Do not try to stretch the arms open as their geometry could lead to the plastic part cracking as it is not designed to flex in this direction.

 

Instructions

·         Place the electrode over the glans of the penis with the ring resting under the glans. Adjust the 4mm loops to ensure a snug fit. Use electrolube to ensure you get good contact between the conductive rubber and your skin.

·         Attach a plug to one end of the 6mm conductive rubber.

·         Insert your sound using sterile electrogel and attach the other cable to your sound. Lock the sound at the desired depth using the black nylon bolt (this will not scratch your sound).

·         Plug your cable into your control box and ensure all power levels knobs are set to zero output.

·         Turn on your power box, select your favourite settings and slowly turn up the power.

Tips For Use

·         Always use conductive lube with conductive rubber. Never use silicone lube or oil-based products as they are an insulator.

·         Silicone lube bonds to conductive rubber and creates an insulating coating, rendering it unusable, so never use silicone lube.

·         Water-based lubes will suffice if you have no electrogel.

·         Only use sterile lube with sounds.

 

Cleaning

To cleaning, wash it in warm soapy water.

Wipe down the insulator with an anti-bacterial wipe.

Ensure everything is dry before storing away until your next stimming session