In order to experiment with bipolar nipple play, I have designed a set of
bipolar nipple clamps.
Supplied
as a pair of nipple clamps. 
Each pair of Bipolar Nipple Clamps is printed in YELLOW PLA. These clamps come
with 6mm conductive rubber tubing that takes 2mm plugs fitted into the clamping jaws.
One side of each set of Conductive Rubber has blanking pins fitted to secure them
in place and to prevent any chance of the two clamps shorting against each other. Your TENS cables plug secures to the other
end.
To use both
sets of clamps, you will need an e-stim control box with two isolated channels to prevent any risk of the current going across
the chest instead of just through each nipple.
These clamps are perfect for larger nipples or for clamping down on the areola behind more petite
nipples.
The large knurled thumbscrews are fitted to nylon nuts and bolts (colour may vary
from that shown) that are used to tighten and hold the clamping jaws together. I used nylon fittings to further isolate the
two pieces of conductive rubber to prevent the current from using metal bolts as a shortcut.
Safety: Never put a current through the chest area. Always use
a control box with isolated channels and use one channel on each nipple.
Instructions
1. Open the jaws of the clamp. Use electrolube to ensure you get good contact between the conductive
rubber and your skin.
2.
Attach the plugs to one end of the conductive rubber. Use one channel per nipple.
3. Pull the nipple through the clamp and squeeze the jaws shut. Tighten the retaining
nuts to the required level of clamping forces.
4. Plug your cable into your control box and ensure all power levels knobs are set to zero output.
5. Turn on your power box, select
your favourite settings and slowly turn up the
6. power.
Tips For Use
• Always use conductive lube with conductive rubber. Never use silicone lube or oil-based products as they are
an insulator.
•
Silicone lube bonds to conductive rubber and creates an insulating coating, rendering it unusable, so never use silicone lube.
• Water-based lubes will suffice
if you have no electrogel.
• Only use a control box with isolated channels and use one channel per nipple
